1. Suitable for assembly line type large dense terminal base glue dispensing, timing and

 quantitative automatic dispensing.

2. The ratio of 2:1 or 4:1 can be freely adjusted, the amount of glue can be freely adjusted,

 and the mechanical gear pump is used for measurement.

3. Automatic rubber ratio pressure abnormal alarm monitoring, A,B barrels have low

 liquid sound and light alarm function.

4. The ratio error is less than ±3%.

5. The glue quantity error is less than ±3%.6. Raw material barrel A constant temperature

 heating control, constant temperature 

between 15°C-65°C can be adjusted, hose with auxiliary heating function, motor stirring.

7. The pipeline design is no-cleaning mode, and the special glue spitting valve has 

automatic suction function.

8. The A/B component of epoxy resin adhesive is automatically absorbed and fed

 and automatically vacuumed.

9. The glue is independently controlled by the glue dispensing system

 (the glue dispensing valve is equipped with A and B rubber gear pumps).

10. Glue dispenser manual automatic timing/quantitative glue.

11. Automatic full set of anti-curing procedures.

12. The glue quantity is adjustable in 5ml-200ml.

13. Epoxy resin rubber A and B barrels are made of 304 stainless steel, 

with A component barrel capacity of 15L and B component barrel capacity of 15L.

Suitable for pipeline type large dense terminal base glue dispensing, timing quantitative fast automatic dispensing.