1. It is mainly used to automatically distribute the adhesive in the battery and automatically spit it onto the battery after quantifying the adhesive through the mechanical arm.

2. The ratio of 2:1 or 4:1 can be freely adjusted, the glue can be freely adjusted, and the mechanical gear pump is used for measurement.

3. Automatic rubber ratio pressure abnormal alarm monitoring, A, B barrel has low liquid sound and light alarm function.

4. The ratio error is less than ±3%

5. The glue quantity error is less than ±3%

6. Raw material barrel A constant temperature PTC heating control, constant temperature 15°C-63°C adjustable, hose with auxiliary heating function, motor stirring.

7. Designed for no-cleaning mode, spit glue is dedicated with automatic suction function. (free of disassembly and washing)

8. The A/B component of epoxy resin adhesive is automatically absorbed and fed and automatically vacuumed.

9. On the same surface, you can point two different types of middle cover, which can be used from the smallest one to 250AH.

10. The glue is independently controlled by the glue head dispensing system (each dispensing valve is equipped with A and B gear pumps).

11. Manual feeding automatic dispensing, can store 4 types of version, each version of 5 document sizes, 2 kinds of medium can be dispensed at the same time.

12. The equipment has a safety cover.

13. Automatic full set of anti-curing procedures.

14. The glue quantity is adjustable in 5ml-300ml.

15. Epoxy resin rubber A and B barrels are made of 304 stainless steel, with A component barrel capacity of 35L and B component barrel capacity of 35L.

It is mainly used to automatically distribute the adhesive in the battery and automatically spit it onto the battery after quantifying the adhesive through the mechanical arm. (Automatic feeding, suitable for automatic line battery cover dispensing)