TYPE 2500 TERMINAL GLUE DISPENSER
-
Describe:
1.The gum ratio 2:1 or 4:1 can be adjusted freely, the am ount of glue can be adjusted freely, adoptmechanical pumpmetering.
2.Automaic monioring abnormal pressure alarm, and the gum ratio abnormal preSsure of A and B materal barrel has A low level acousto-optic alam function.
3. The matching error is less then +/-3%.
4. The glue quantitative error is less then +/-3%
5.Barels A constant temperature PTC heating control, constan temperature is between 15°C to 65°C,ruber road wih auxiliay heating funclion and stir mo to funclion.
6.Piping design for don't need to be cleaned , glue spit valves with automatic suction function.
7.Epoxy resin adhesive A/B component absorbs feeding and operates vacuum deeration treatment automatically.
8.The device adopts a independent glue dispensing system to control the outet of the glue (dispensing valves are all equipped withA.B gear pump).
9. Automatic timing/quantitative outrubber,by hand control.
10.A full set of automatic prevent curing process.
11.Once the glue is measured in 0.5ml to 50ml can be a djusted.
12.Epoxy resin adhesiveA,B gule barrels are made of 304 stainless steel material,both of the Aand B component buket capacity are 10L.
-
Use:
Mainly used for artificial hand-heldbattery terminals for gelatin.
Specifications
Equipment specifications:2500
Power supply voltage:380VAC/50Hz
Power:2.5KW
Gas source:0.5mpa ±0.1mpa ,filtered and dry compressed air
Productivity: More than 1,000 consecutive points per hour
Reject rate:0
Table height :750 ±50(mm)
Total weight :300KG
Equipment color :Science grey
Device dimension: L900mm*W650mm*H1580mm
Frame main material :aluminum profile and 304 stainless steel