1. It is mainly used to automatically dispense the battery color glue into the dispensing pot after quantitative or continuous dispensing by foot pedal.

2. The glue output ratio of 2:1 or 4:1 can be adjusted freely, and the amount of glue can be adjusted freely. It is measured by a mechanical gear pump.

3. Automatic alarm monitoring for the abnormal pressure of the glue output ratio, and the A and B tanks have the low liquid level sound and light alarm function.

4. The proportion error is less than ±3%

5. Quantitative error of glue output is less than ±3%

6. Constant temperature PTC heating control for raw material tank A, the constant temperature can be adjusted between 15°C and 65°C, the glue pipeline has auxiliary heating function, and the motor is stirred.

7. Epoxy resin glue A/B component automatically absorbs and feeds and performs automatic vacuum defoaming treatment.

8. The glue output is independently controlled by the glue head dispensing system (each way of dispensing penalty glue is equipped with A and B gear pumps)

9. Foot-operated automatic timing/quantitative glue dispensing

10. Automatic full set of anti-curing programs.

11. The glue output can be adjusted from 50ml-1500ml at a time.

12. Epoxy resin glue A and B plastic barrels are made of 304 stainless steel. The volume of the component A barrel is 35L, and the volume of the component B barrel is 35L.

Automatic glue for two-color glue.