全自动四头贴标机(JR-839型)Automatic four-head labeling machine (JR-839)
-
Describe:
1. Applicable products: meet the two different plane labeling and two side
labeling at the same time;
2. Adjustable labeling position and labeling speed;
3. It can be operated independently or connected to the transmission line
(automatic labeling, automatic transmission line configuration, the speed of the
system is slower than the labeling transmission to facilitate material separation);
4. Pre-clean and dry the battery label surface before labeling.
5. Labeling accuracy :±1mm(except battery error) (different batteries have no
visual difference), requiring smooth labeling, no bubbles, no scars.
6. Inner diameter of label roll :φ76mm; Label roll Outer diameter :φ150-300mm
7. Label range: label length (15-300)mm x label height (15-120)mm
8. The electric system is controlled by Panasonic PLC, Samkoon man-machine
interface, Resai stepper motor and stepper driver, optical fiber sensor electronic
control system.
-
Use:
Automatic labeling (no labor, high efficiency, flat labeling, simple operation)
Specifications
Equipment Specifications Model JR-839
Power supply voltage 220VAC/50Hz
Power 1.5KW
Air source 0.5MPa±0.1MPa, filtered and dried compressed air
Capacity ≥25 pieces per minute, depending on product length and quality
Scrap rate 0
Table height 750±50(mm)
The weight of the equipment is 150KG
Equipment color Stainless steel
Overall dimensions L1080mm × W1000mm × H1400mm
Frame main material stainless steel