1. The ratio of 2:1 or 4:1 can be freely adjusted, the amount of glue can be freely

 adjusted, and the mechanical gear pump is used for measurement.

2. Automatic rubber ratio pressure abnormal alarm monitoring, A, B 

barrel has low liquid level sound and light alarm function.

3. The ratio error is less than ±3%

4. The glue quantity error is less than ±3%

5. Raw material barrel A constant temperature PTC heating control, 

constant temperature between 15℃-65℃ adjustable, hose with auxiliary

 heating function, motor stirring.

6. Designed for no-cleaning mode, spit glue is dedicated with automatic 

suction function.

Seven. The A/B component of epoxy resin adhesive is automatically

 absorbed and fed and automatically vacuumed.

8. Feed the middle cover of the battery. For example, 8 middle covers

 are fed at a time.

9. The glue is independently controlled by the glue head dispensing

 system (each dispensing valve is equipped with A and B gear pumps).

10. Manual feeding automatic dispensing, can store 4 versions, each

 version of 5 document sizes,2 can be dispensed at the same time.

11. The equipment has a safety cover.

12. Automatic full set of anti-curing program.

13. The glue quantity is adjustable in 5ml-50ml.

14. Epoxy resin rubber A and B barrels are made of 304 stainless steel, 

with A component barrel capacity of 35L and B component barrel capacity of 35L.

1. The ratio of 2:1 or 4:1 can be freely adjusted, the amount of glue can be freely adjusted, and the mechanical gear pump is used for measurement.2. Automatic rubber ratio pressure abnormal alarm monitoring, A, B barrel has low liquid level sound and light alarm function.3. The ratio error is less than ±3%4. The glue quantity error is less than ±3%5. Raw mater