1. The ratio of 2:1 or 4:1 can be freely adjusted, the amount of glue can be freely 

adjusted, and the mechanical gear pump is used for measurement.

2. Automatic rubber ratio pressure abnormal alarm monitoring, A, B barrel has

 low liquid level sound and light alarm function.

3. The ratio error is less than ±3%

4. The glue quantity error is less than ±3%

5. Raw material barrel A constant temperature PTC heating control, constant temperature 

between 15℃-65℃ adjustable, hose with auxiliary heating function, motor stirring.

6. Designed for no-cleaning mode, spit glue is dedicated with automatic suction function.

Seven. The A/B component of epoxy resin adhesive is automatically absorbed and

 fed and automatically vacuumed.

8. Feed the middle cover of the battery. For example, 8 middle covers are fed at a time.

9. The glue is independently controlled by the glue head dispensing system

 (each dispensing valve is equipped with A and B gear pumps).

10. Manual feeding automatic dispensing, can store 4 versions, each version

 of 5 document sizes,2 can be dispensed at the same time.

11. The equipment has a safety cover.

12. Automatic full set of anti-curing program.

13. The glue quantity is adjustable in 5ml-50ml.

14. Epoxy resin rubber A and B barrels are made of 304 stainless steel, 

with A component barrel capacity of 35L and B component barrel capacity of 35L.

It is mainly used to automatically distribute the adhesive in the battery and automatically spit it onto the battery after quantifying the adhesive through the mechanical arm. (Manual feeding, suitable for a variety of special-shaped battery cover dispensing)