1. The ratio of 2:1 or 4:1 can be freely adjusted, the amount of glue can be freely adjusted, 

and the mechanical gear pump is used for measurement.

2. Automatic rubber ratio press knife abnormal lifting alarm monitoring, A, B

 barrel with low liquid level sound and light alarm function.

3. The ratio error is less than ±3%

4. The glue quantity error is less than ±3%

5. Raw material barrel A constant temperature heating control, but the temperature

 can be adjusted between 15℃-65℃, rubber hose with auxiliary heating function, motor stirring.

6. Automatic and manual cleaning function (design no-cleaning mode), special glue

 valve with automatic suction function.

7. The A/B component of epoxy resin adhesive is automatically absorbed and

 fed and automatically vacuumed.

8. The glue is independently controlled by the glue dispensing system

 (the glue dispensing valve is equipped with A and B rubber gear pumps).

9. Glue dispenser manual automatic timing/quantitative glue.

10. Automatic full anti-curing program.

11. The glue quantity is adjustable from 0.5ml-50ml.

12. Epoxy resin rubber A and B barrels are made of 304 stainless

 steel, with A component barrel capacity of 15L and B component barrel capacity of 15L.

It is mainly used for manual hand-held dispensing of color glue to battery terminals.