1. It is mainly used to automatically prepare the battery color glue by 

foot quantification or continuous glue automatically spit into the glue dispenser.

2. The ratio of glue 2 :1 or 4:1 can be freely adjusted, the amount of glue 

can be freely adjusted, and the mechanical gear pump is used for measurement.

3. Automatic rubber ratio pressure abnormal alarm monitoring, A,B barrel

 has low liquid level sound and light alarm function.

4. The ratio error is less than ±3%

5. The glue quantity error is less than ±3%

6. Raw material barrel A constant temperature PTC heating control, 

constant temperature 15°C-65°C adjustable, hose with auxiliary heating

 function, motor stirring.

7. The A/B component of epoxy resin adhesive is automatically absorbed

 and fed and automatically vacuumed.

8. The glue is independently controlled by the glue head dispensing system, 

(each dispensing dispensing is equipped with A and B gear pumps)

9. Pedal type automatic timing/quantitative glue out

10. Automatic full set of anti-curing procedures.

11. The glue quantity is adjustable at 50ml-1500ml.

12. Epoxy resin rubber A and B barrels are made of 304 stainless steel. 

The capacity of component A bucket is 35L, and the volume of component B bucket is 35L.

Automatic dispensing of two-color glue.