1.Suitable for assembly lne Large-Sealed Terminals color glue dispensing.re gular quantitative fast automatic dispensing.

2The gum ratio 2:1 or 4:1 can be adjustea freely, tne am ount or gue can be agjusted freely, adoptmechanical pumpmetering.

3.Automatic monitoring abnormal preSsure alarm, and the gum rawo aynoTma pressure of A and B maleral barrel has A low level acousto-optic alam function.

4.The matching error is less then +/-3%.

5. The glue quantitative error is ress then +/-3%.

6 .Barels A conslantitemperature PTC neaing control,constdnt temperaure is between 15°Cto 65°C,rubber road with auxliary heating function and stir mo tor funtion.

7. Piping design for don't need to be cleaned , glue spit valves with automatic suction function.

8.Epoxy resin adhesive A/B component absorbs feeding and operates vacuum deaeration treatment automatically.

9.The device adopts a independent glue dispensing system to control the outlet of the glue(dispensing valves are all equipped withA B gear pump).

10.Automatic timing/quantitative outrubber,by hand control.

11.A full set of automatic prevent curing process.

12.Once the glue is measured in 5mi to 200ml can be a djusted.

13.Epoxy resin adhesiveA.B gule barrels are made of 304 stainless steel materia,both of the A and B component buket capacity are 15L.

Suitable for assembly line Large-sealed Terminals bottom gluedispensing regular quantitative fastautomatic dispensing