1. Mainly used to automatically dispense the glue on the battery middle cover after the automatic dispensing of the glue through the robotic arm. (Manual feeding, suitable for dispensing glue on the cover of a variety of special-shaped batteries)

2. The glue output ratio of 2:1 or 4:1 can be adjusted freely, and the amount of glue can be adjusted freely. It is measured by a mechanical gear pump.

3. Automatic alarm monitoring for the abnormal pressure of the glue discharge ratio, and the A and B tanks have the low liquid level sound and light alarm function.

4. The proportion error is less than ±3%

5. Quantitative error of glue output is less than ±3%

6. Constant temperature PTC heating control of raw material tank A, the constant temperature can be adjusted between 15℃-65℃, the glue pipeline has auxiliary heating function, and the motor is stirred.

7. It is designed for no-cleaning mode, and the glue spit is dedicated with automatic suck back function.

8. The A/B component of epoxy resin glue is automatically absorbed and loaded and subjected to automatic vacuum defoaming treatment.

9. The battery middle cover is fed, 20AH is an example, 8 middle covers are discharged at a time.

10. The glue output is independently controlled by the glue head dispensing system (each dispensing valve is equipped with A and B gear pumps)

11. Manual feeding and automatic glue dispensing, can store 4 types of patterns, 5 document sizes for one pattern at a time, and 2 types can be glued at the same time.

12. The equipment has a safety protective cover.

13. Automatic full set of anti-curing program.

14. The glue output can be adjusted from 5ml-50ml at a time.

15. The epoxy resin glue A and B plastic barrels are made of 304 stainless steel, the A component bucket has a capacity of 35L, and the B component bucket has a capacity of 35L.

Mainly used for the battery middle-lidautomatic mixing then quantitavive dispensingby manipulator automatically spiton thebattery middle-id .(Artificial adding material,suitable for a variety of special-ahapedbattery middle- lid dispensing).