1. Mainly used to automatically dispense the glue on the battery middle cover after the automatic dispensing of the glue through the robotic arm. (Automatic feeding, suitable for one or two kinds of single battery middle cover dispensing)

2. The glue output ratio of 2:1 or 4:1 can be adjusted freely, and the amount of glue can be adjusted freely. It is measured by a mechanical gear pump.

3. Automatic alarm monitoring for the abnormal pressure of the glue discharge ratio, and the A and B tanks have the low liquid level sound and light alarm function.

4. The proportion error is less than ±3%

5. Quantitative error of glue output is less than ±3%

6. The raw material barrel A has constant temperature PTC heating control, the constant temperature can be adjusted between 15°C and 55°C, the glue pipeline has auxiliary heating function, and the motor is stirred.

7. Designed as a no-cleaning method, and the special glue valve has an automatic suck back function.

8. The A/B component of epoxy resin glue is automatically absorbed and loaded and subjected to automatic vacuum defoaming treatment.

9. Automatic battery middle cover feeding, the silo is full of more than 200 pieces at a time.

10. The glue output is independently controlled by the glue head dispensing system (each dispensing valve is equipped with A and B gear pumps)

11. The automatic dispensing machine for the middle cover automatically runs unattended (6000 type).

12. The equipment has a safety protective cover.

13. Automatic full set of anti-curing program.

14. The glue output can be adjusted from 5ml-50ml at a time.

15. Epoxy resin glue A and B plastic barrels are made of 304 stainless steel. The capacity of component A is 35L, and the capacity of component B is 35L.

主要用于将电池中盖胶自动配好后通过机械臂定量出胶自动吐到电池中盖上。(自动上料，适合自动线电池中盖点胶)